VIOMI V3 - Page 10

Next, go to Figure 4, click "Confirm indicator light flashes", then click "WiFi Quick Connect" shown
in Figure 5, and wait for the WiFi connection as shown in Figure 6. When the WiFi connection is
8
successful, please click "Finish" shown in Figure 7, and the application connection is completed.
Figure 4
Figure 5 Figure 6
Figure 7
Figure 1
Figure 2
Figure 3
B:Bluetooth distribution network:
Open the application and the connection steps are as follows:
First, click "Add Device" shown in Figure 1, then select "Small Appliances", and then click "
Sweeping Robot (Bluetooth)" shown in Figure 2. Check "Confirm indicator light flashes" in Figure 3
and click Next to configure the network, as shown in Figure 4. Select the appropriate WiFi and
enter the password, click Next, and wait for the machine to connect successfully (Figure 5 and
Figure 6)
Note: When the mobile phone's Bluetooth is turned off, Bluetooth connection is not supported.