INSTALLATION
®
©
.->
_ SOURCE
_ MEN_J
_ voL,
_ voL-
_ STANDBY
VIDIO
L
R
HDMI3 INPUT
1: Remote control sensor.
2: Indicator LED: GREEN POWERON.
RED O STANDBY.
3: Key board
!, SOURCE: Display the input source menu.
2, MENU: Display-main MENU.
3. CH+/CH-:In TV mode, press "CIf+" or "CH_" to
change the channel up and down.ln MENU mode, press
"CIf+" or "CIf-" to select items .In standby mode,
press "CIf+" or "CIf-" to turn on the TV.
4. VOL+/VOL-:Adjust sound level.ln MENU mode,
press "VOL+" or "VOL-" to adjust the item that you
selected.
5. STANDBY : Press this button to turn the unit ON
fi-om STANDBY mode. Press it again to turn the set
back to STANDBY.
6.VIDEO INPUT
7.AUDIO INPUT-L
8.AUDIO INPU_I:R
9.HDMI3 INPUT
G ® ® ®® © ®
I.HDMI Input
2.VGA Port (PC Input)
3.Component Video (YPbPr) Input
4.Audio Input
5.Composite Video Input
6.PC Audio Input
7.Antenna Socket
8.AC Power Socket
@
Note: l.Composite video input and component video input share the audio input.
2.When "DVI to HDMI cable" is used, the audio output for DVI needs to be connected to the
PC Audio Input (above 7).
_6_
To Next Page
Loading...
Need help?
General
