Vipe NITRO X3 - Rear Panel Ports and Basic Operations; Port Descriptions; Power and Charging; Media Playback and Connectivity

Power supply
Connect the supplied cable to AC power cord and charge the built
in battery. Please make sure battery is fully charged. Use on/o󰀨
button on the top panel to switch power on/o󰀨. Use on/o󰀨 button
on the remote control to switch power o󰀨.
Type-C playback
Insert a Type-C drive into the Type-C playback port on the rear
panel, press “MODE” button to select Type-C USB mode, the
bluetooth speaker starts playing an audio track in the connected
Type-C USB drive. It could also insert a Type-C to USB adapter
into the Type-C playback port to play an audio track. The Type-C
to USB adapter is compatible with most of laptop/tablet/smart
phone with a USB Type-C port.
Charging the external device via Type-C port
Use the Type-C charging cable (not supplied) to connect Type-C
port (DC 5V 1A) on the rear panel to the external device in power
on mode for charging the external device.
Could also insert a Type-C to USB adapter into the Type-C charge
port to start charging external device. It is compatible with most
of laptop/tablet/smart phone with a Type-C to USB adapter.
Bluetooth
Short press “Mode” button to access Bluetooth mode. Select the
speaker model name “Vipe NITRO X3” or “Vipe NITRO X3 PRO”
Basic operations
1. Audio output
2. Type-C playback
3. Type-C charge
4. FM antenna input
5. Power input
6. AUX input
7. Guitar input
8. Battery charge led
9. Microphone input
Rear panel (g. 3)