EasyManua.ls Logo

Viper 3002 - Wiring Diagram A, (+) 12 Volt Pulses Driving Factory Relays

Viper 3002
46 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
10
©
2006
Directed Electronics, Inc.
NNOOTTEE::
This is only possible with systems with selectable duration lock pulses (three second
minimum required).
Type F - This is a one wire system. Ground pulse to unlock and break open to lock.
Type G - This is a one wire positive multiplex system. Sending a (+) 12 volt signal through resistors
will activate lock and unlock.
Type H - This is a one wire negative multiplex system. Sending a negative signal through
resistors will activate lock and unlock.
DDoooorr LLoocckk SSyysstteemmss IInnffoorrmmaattiioonn
This is a general information guide; For more detailed instructions on wiring vehicles door lock
systems, including information on multiplex systems, refer to the Door Lock Wiring Guide
(Document #1041) available to authorized dealers at
wwwwww..ddiirreecctteecchhss..ccoomm
or through the DirectFax
system.
WWiirriinngg DDiiaaggrraamm AA,, ((++)) 1122 VVoolltt PPuullsseess DDrriivviinngg FFaaccttoorryy RReellaayyss