Viper 4204 User Manual

Details the contents included with the remote start and keyless entry system.

Provides critical safety warnings and governmental regulatory compliance information for system operation.

Explains the warranty coverage and validation process for the system.

Information on how to obtain additional or replacement remote controls for the system.

Explains the conventions and symbols used throughout the manual for clear understanding.

Details the features and functions of the remote control components, including buttons and LEDs.

Describes the components of the Control Center, including the antenna, status LED, and control button.

Explains how to activate system features using command buttons on the remote.

Details how to execute basic and advanced commands by pressing remote control buttons.

A comprehensive table outlining basic and advanced commands for different remote buttons.

Instructions for locking the vehicle doors using the remote control.

Instructions for unlocking the vehicle doors using the remote control.

How to activate or deactivate the vehicle's remote starter system.

Operation for auxiliary functions or trunk release using the remote control.

Locks vehicle doors without audible confirmation, using the remote.

Unlocks vehicle doors without audible confirmation, using the remote.

Resets the remote start runtime counter for extended engine operation.

Activates or deactivates the auxiliary output function 1 via the remote.

Requests and displays the vehicle's interior temperature via remote LEDs.

Enters or exits Valet Mode using the remote control for service or parking.

Activates Timer Start for automatic engine starting at pre-set intervals.

Activates or deactivates the auxiliary output function 2 via the remote.

Checks and displays the system's current lock status via remote LEDs and tones.

Activates the car finder function to locate the vehicle using horn and lights.

Automatically starts the engine based on temperature or battery level thresholds.

Activates or deactivates the auxiliary output function 3 via the remote.

Displays the remaining runtime of an active remote start session.

Activates the vehicle's defogger circuit via the remote control.

Activates or deactivates the auxiliary output function 4 via the remote.

Instructions for programming various features and options of the remote control.

Process for establishing secure communication between the remote and the vehicle system.

Details on configuring various operational features for the remote controls.

Configuration options specific to the Responder LE remote control.

Configuration options for the 1-way companion remote control.

Configures whether remote control buttons lock automatically after a period of inactivity.

Enables or disables automatic unlocking of remote buttons after ignition is turned off.

Manages how the remote receives system messages, including power save options.

Enables control of a second vehicle using the remote control.

Controls whether the remote emits audible beeps for confirmation of commands.

Steps to manually disable the system using the control button on the Control Center.

Allows exiting the vehicle with the engine running for short stops.

Seamlessly transfers engine control from remote start to the vehicle's ignition.

Ensures vehicle doors remain locked while the engine is running via remote start.

Procedure to disable the remote start function using a toggle switch.

Enables automatic engine starting for battery maintenance or cold weather.

Details the operation of the Timer Start feature for scheduled engine activation.

Automates engine starts based on temperature and battery levels.

How the system reports interior temperature changes to the remote.

Notifications provided before the remote start engine session ends.

Procedure for enabling Manual Transmission Start mode for safe operation.

How to activate the Turbo Timer mode to keep the engine running after shutdown.

Table for identifying configuration issues via parking light flashes and their solutions.

Automatic door locking feature after vehicle exit and door closure.

Automatic re-locking of doors if not entered after unlocking by remote.

Temporarily bypasses passive locking and comfort closure for one cycle.

Manually entering and exiting Valet Mode using the control button.

Reduces power consumption by modifying control center LED output and remote paging.

Restores the system to its previous state after power disconnection.

System sends silent messages to update remote control status.

Steps to select between Car 1 and Car 2 for remote control operation.

Utilizing remotes to control multiple vehicles and configure settings per vehicle.

System recognizes specific remotes to set personalized user preferences.

Automatically closes windows and sunroof on compatible vehicles.

Configures door unlocking to emulate OEM driver priority style.

Alerts and behavior of remotes when battery power is low.

Specific alerts emitted by remotes indicating low battery status.

Suggestions for maximizing battery life for the remote controls.

Step-by-step guide for replacing batteries in the remote controls.

Guidelines for environmentally responsible battery disposal.

Definitions of technical terms and components used within the manual.

Details compliance with FCC rules and guidelines for radio frequency devices.

Emphasizes professional installation and user responsibilities for safe system operation.

Safety guidelines for operating the remote start system, especially in enclosed areas.

Specific safety procedures and considerations for remote starting manual transmission vehicles.