Viper 5601 User Manual

Security and Remote Start
Model 5601
Installation Guide
This product is intended for installation by a professional
installer only! Attempts to install this product by a person other than a
trained professional may result in severe damage to a vehicle’s electrical
system and components.
© 2008 Directed Electronics, Vista, CA
N5102V 2008-06

Viper 5601 Specifications

General

Range	Up to 1 mile
Channels	5
LCD Screen	No
Vibration Alerts	No
Keyless Entry	Yes
Security Features	Yes
SmartStart Compatible	Yes
Remote Start	Yes
Security System	Yes
Number of Buttons on Remote	5
Number of Remotes	2
Type	Remote Starter and Security System

Summary

Safety First and Installation Warnings

Professional Installation Required

System installation must be performed by an authorized Directed Electronics dealer.

Adequate Ventilation for Operation

Never operate the system in an enclosed or partially enclosed area without ventilation.

User Precautions and Responsibilities

Electrical Testing Safety

Primary Harness (H1) Wiring: Trunk, 12V, Siren

H1/1 Trunk Release, H1/2 12V Constant, H1/3 Siren

Details wiring for trunk release, constant 12V input, and siren output.

Primary Harness (H1) Wiring: Light Flash & Ground

H1/4 Light Flash Isolation, H1/5 Chassis Ground

Explains wiring for light flash isolation and chassis ground connections.

Primary Harness (H1) Wiring: Door & Dome Light

H1/6, H1/7, H1/8 Door Trigger, H1/9 Dome Light Output

Details wiring for door triggers, trunk pin input, and dome light output.

Primary Harness (H1) Wiring: Activation & Parking Lights

H1/10 Activation Input, H1/11 Parking Light Output

Explains wiring for remote start activation input and parking light output.

Primary Harness (H1) & Auxiliary Harness (H2) Wiring

H1/12 Ground When Armed Output

Explains the Ground When Armed output and its applications.

H2/1 Factory Alarm Disarm Output

Auxiliary Harness (H2) Wiring Details

H2/2 Alarm Arm Output, H2/3 Aux 1 Output, H2/4 Aux 2 Output

Details wiring for alarm arm output and auxiliary outputs 1 and 2.

Auxiliary Harness (H2) Wiring Details (cont.)

H2/5 Aux 3 Output, H2/6 2nd Unlock, H2/7 Wait-to-Start Input

Details wiring for Aux 3, 2nd unlock, and diesel wait-to-start input.

H2/8 Horn Honk Output

Details wiring for the horn honk output.

Heavy Gauge Harness (H3) Wiring: Ignition & Accessory

H3/1 Ignition 1, H3/2 Ignition 2, H3/3 Accessory Output

Details wiring for ignition 1, ignition 2, and accessory outputs.

Heavy Gauge Harness (H3) & Input Harness: Starter & Neutral Safety

H3/4-H3/9 Starter/Ignition/Accessory, Neutral Safety Input

Details starter, ignition, accessory wiring and neutral safety input.

Neutral Safety Switch Interface and Testing

Neutral Safety Switch Interface

Neutral Safety Switch Testing Procedure

Step-by-step guide to test the neutral safety shutdown circuit.

Feature Menus: Security

Menu 1: Security Feature Settings

Details settings for System Arming, Panic Mode, Siren Duration, and Door Locks.

Feature Menus: Convenience

Menu 2: Convenience Feature Settings

Covers One-time Bypass, Nuisance Prevention, Valet Switch Pulse Count, and Aux outputs.

Feature Menus: Remote Start

Menu 3: Remote Start Feature Settings

Details settings for Transmission Mode, Engine Checking, Cranking Time, and Turbo Mode.

Detailed Feature Descriptions: Security

Menu 1: Security Feature Details

Detailed explanation of Active/Passive Arming, Panic Mode, and Siren Chirps.

Detailed Feature Descriptions: Security (cont.)

Menu 1: Security Feature Details (cont.)

Details Comfort Closure, Horn Function, Hood Trigger Type, and Sensor Trigger.

Detailed Feature Descriptions: Convenience

Menu 2: Convenience Feature Details

Explains One-time Bypass, Nuisance Prevention, and Valet Switch Pulse Count.

Detailed Feature Descriptions: Convenience (cont.)

Feature Details: Convenience & Remote Start

Menu 2: Convenience Feature Details (cont.)

Explains Aux 2/3 Output types, Aux 2/3 Linking, and Aux 3 Linking.

Menu 3: Remote Start Feature Details

Details Manual Transmission Mode and Engine Checking Virtual Tach.

Detailed Feature Descriptions: Remote Start (cont.)

Menu 3: Remote Start Feature Details (cont.)

Explains Parking Lights, Anti-Grind, Tach Mode Starter Release, and Vehicle Temp Auto Report.

Remote Start Safety Checks

Remote Start Safety Check Procedures

Tests for brake, hood pin, and neutral safety shutdown circuits before reassembly.