27
© 2011 Directed Electronics. All rights reserved.
Car Select
Car 2 remote control option must first be turned On (See Remote Con-
trol Configuration section to turn on).
1. Press and hold the
button for 3 seconds. The LED flashes once
or twice to indicate the selected Car is 1 or 2.
2. Release the button for Car Select or continue to hold for program-
ming.
3. Release the
button, then press and release while the LED
flashes continue to perform Car Select. Once the car is selected
a command can be performed by pressing one of the command
buttons.
To Next Page
Loading...
