To set Boat Battery
Press Menu to enter into menu setting.
Repeatedly press Menu to switch to Alarm menu
Use the Up/Down Arrow to select Boat Battery option.
Press ent to enter into setting,
Use the Up/Down Arrow to change the value.
Press Ent to confirm and exit the setting.
Note: Only when the RTS sensor is powered by the battery of your bait boat, then the Boat Battery
Alarm can be available.
Note: Once triggered, an alarm message will appear on the screen. The alarm will repeatedly
appear unless the voltage of the boat is higher than the setting.
You can manually choose exiting the alarm mode by entering into Boat Battery Alarm menu setting
and just changing the setting to a safe value will be ok.
System
Beeper
Beeper is used to determine whether the fish finder will sound a tone when a key is pressed.
To set Beeper
Press Menu to enter into menu setting.
Repeatedly press Menu to swtich to System menu.
Use the Up/Down Arrow to select Boat Battery option
Press Ent to enter into setting.
Use the Up/Down Arrow to select the option.
Press Ent to confirm the setting.
Press Exit to exit the setting.
Units
Units is used to choose the depth unit and temp. unit
To Next Page
Loading...