Press Exit to exit the setting
Simulator
Simulator is used to let you practise using the FC500 fish finder as if you were on the water.
Under the simulating mode, the simulated bottom signal with fish signals will display and move
across the screen and under the simulating mode, you can still change settings to view different
sonar images to have a complete understanding of your fish finder.
To set the Simulator:
Press Menu to enter into menu setting
Repeatedly press Menu to switch to System menu
Use the Up/Down Arrow to select Simulator option.
Press Ent to enter into setting
Use the Up/Down Arrow to select the option
Press Ent to confirm the setting.
Press Exit to exit the setting.
To Next Page
Loading...