Viptela vEdge 100wm Series User Manual

vEdge 100wm Router
The vEdge 100wm router delivers highly secure site-to-site data connectivity to small business and home
offices (SOHO). The vEdge 100wm router is a fixed-port-configuration router with the following features:
• Built-in LTE modem with mini-SIM (or 2FF) card
• Two multiband swivel-mount dipole antennas
• Supports a 4G/3G/2G–capable modem to connect to cellular networks
• Wi-Fi access point capability
• Wi-Fi radio configurable for 2.4 GHz or 5.0 GHz
• Five built-in 10/100/1000–Mbps Ethernet ports
• Power over Ethernet (PoE) source support on one Ethernet port
• Encryption and QoS support
• 100 Mbps forwarding throughput (inclusive of encryption)
• Secure identification chip for anticounterfeit and secure authentication
• Integrated power supply
• Kensington security lock slot to physically lock down the router
• GPS input for geographical location
• Desktop mount or wall mount
Chassis Views
Figure 1 and Figure 2 show the front and back panels of the vEdge 100wm router, indicating the locations of
the power interfaces, status indicators, and chassis identification labels.
Figure 1: Front Panel of the vEdge 100wm Router
vEdge 100wm Router
1

Viptela vEdge 100wm Series Specifications

General

Category	Network Router
Form Factor	Desktop
Storage	8 GB eMMC
Memory	4 GB DDR3
Operating System	Viptela OS
Humidity	5% to 95% non-condensing
Model	vEdge 100wm
Weight	2.2 lb (1.0 kg)
Management Interface	1 x RJ-45 Console
Operating Temperature	0° to 40°C (32° to 104°F)

Summary

Product Components and Specifications

Wireless Platform Details

Details specifications for the vEdge 100wm wireless platforms, including modem and LTE bands.

Front and Rear Panel Details

Wi-Fi Capabilities

Details the Wi-Fi capabilities of the vEdge 100wm router, including supported protocols and security.

Front Panel Status LEDs

Describes the five chassis status LEDs on the front panel and their indications.

Device Ports and Connectors

Ethernet Ports (RJ-45)

Describes the five RJ-45 Ethernet ports and their capabilities (10/100/1000 Mbps, PoE).

Serial Console Port

Explains the serial console port accessible via a USB Mini-B connector.

Power and Cooling System

AC Power Supply Unit

Describes the integrated AC power supply and its C6 male AC inlet connector.

Cooling System Operation

Explains the cooling system, fan control, and temperature monitoring for optimal operation.

Site Planning and Installation Guide

General Safety Precautions

Provides general safety standards for installing and connecting the router, including electrical codes.

Site Preparation Requirements

Offers guidelines for preparing the site, including rack layout, airflow, and ESD prevention.

Environmental Installation Requirements

Specifies the necessary environmental conditions for installing the router (dry, clean, temperature-controlled).

Router Unpacking Procedure

SIM Card Installation

Guides the user through installing the SIM card into the SIM card socket on the router.

Antenna Attachment Procedure

Wall Mounting Instructions

Connecting the Router

Connecting the Router to Power

Details how to connect the router to an AC power source using the provided power cord.

Default Router Configuration

Default Config (Releases 16.3+)

Default Config (Releases 16.2-)

Troubleshooting and Maintenance

System Alarm Severity

Hardware Alarm Types

Details hardware alarms triggered by physical conditions like temperature, power supply, or fan failure.

Monitoring Alarms and Environment

Restoring Router Configuration

Factory Default Configuration Reset

Router Reset Procedures

Hardware Return Process

Finding Serial and Model Numbers

Obtaining an RMA Number