EasyManua.ls Logo

Virtue ION BOARD - Debounce & Ramp Activation Speed; Debounce Setting (Green); Ramp Activation Speed (Blue)

Virtue ION BOARD
16 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
debounce & ramp activation
8
Debounce is the amount of time the trigger has to be released before
the next trigger pull is registered. Virtue’s advanced debounce algo-
rithm, ensures every pull is registered giving the highest possible rate
of fire. Values range from 1-30 (milliseconds) with the default set to 5.
1. With the marker off, and tournament lock off, hold the trigger and
turn the marker on. Release the trigger once the marker turns on.
2. The LED will cycle through a rainbow of colors and stop on purple.
3. Tap the trigger once until it stops on green for Debounce.
4. Pull and hold the trigger until the LED flashes the number of times
the current Debounce is set to.
5. When the LED stops flashing, tap the trigger the number of times
of the desired debounce (1-30).
6. The LED will flash the number of taps you entered, then flash the
rainbow of colors, and stop on green. The new value has been set.
7.7. To exit programming mode, shut the marker off.
The Ramp Activation Speed only affects Firing Modes 4 and 7 (Ramp
and Breakout Mode). The default setting is 5. So pulling the trigger @
5bps, activates ramping, and adds the percentage set in the ā€œRamp
Percentageā€ setting (pg 9). Values are equivalent to balls per second.
For example, 5 = 5bps; 10 = 10bps, etc.
1. With the marker o1. With the marker off, and tournament lock off, hold the trigger and
turn the marker on. Release the trigger once the marker turns on.
2. The LED will cycle through a rainbow of colors and stop on purple.
3. Tap the trigger until it stops on blue for Ramp Activation Speed.
4. Pull and hold the trigger until the LED flashes the number of times
the current Ramp Activation Speed is set to.
5.5. When the LED stops flashing, tap the trigger the number of times
of the desired Ramp Activation Speed in balls per second (5-15).
6. The LED will flash the number of taps you entered, then flash the
rainbow of colors, and stop on blue. The new value has been set.
7. To exit programming mode, shut the marker off.
Virtue Paintball, LLC || http://www.virtuepaintball.com
next
ā€œVirtue is the best upgrade you can do to your gun. So easy
to program, and the rate of fire and eye logic are the bestā€
- Alex Lundqvist, Russian Legion