Virutex PEB200 User Manual

Removal of the glue tank cover.
Unscrew knob A (Fig. 12) three turns, move the cover forward
until it has been dislodged from the tank and lift it upwards
(Fig. 13) to remove it.
This operation must always be carried out with the
machine hot.
10. MACHINE OPERATION
10.1 PEB200
10.1.1 Edgebanding with the PEB200
Preste atención a las normas de seguridad.
Pay attention to the safety guidelines.
You must always glue in a clockwise direction (Fig. 26).
(Figure 12)
(Figure 13)
B
A
(Figure 26)
30 - PEB200-PEB250 / Operating instructions

Virutex PEB200 Specifications

General

Brand	Virutex
Model	PEB200
Category	Industrial Equipment
Language	English