ViSAGE MD 12450 - Switching the Device On and Off

32
After Sales Support
Telephone: 1300 884 987
Email: australia@medion.com
Switch device on and off
 Press button 1 or 2 to switch on the unit.
The corresponding button will light up.
The measurement starts automatically.
 Press button 1 or 2 again to switch off the unit.
Press the TIME button to switch the unit into standby mode.
The unit is in standby mode.
The unit will switch off if you do not press any buttons for around 2 minutes.
12450 AUS Final REV1 Content.indd 3212450 AUS Final REV1 Content.indd 32 24.08.2012 14:16:5324.08.2012 14:16:53