Why is my ViSAGE Blood Pressure Monitor cuff not inflating enough?
The cuff may not inflate sufficiently due to several reasons. First, ensure the cuff tube is correctly connected to the device. Attach the plug on the cuff tube correctly. Second, check for leaks in the tube or cuff; if present, replace the tube or cuff. Finally, make sure you put the cuff on correctly before taking the measurement again.
What to do if my ViSAGE MD 15469 Blood Pressure Monitor shows Er5?
The Er5 error code indicates that the measurement failed because you moved or spoke during the process. To resolve this, keep still and do not speak while the measurement is being taken.
What does Er2 mean on my ViSAGE MD 15469 Blood Pressure Monitor?
The Er2 error code indicates that the cuff is not in the right position on the arm. To resolve this, put the cuff on correctly and take the measurement again.
What to do if my ViSAGE MD 15469 displays 'Error. Please measure again'?
If your ViSAGE Blood Pressure Monitor displays 'Error. Please measure again,' ensure the cuff is fitted correctly and then take the measurement again.
What to do if ViSAGE MD 15469 Blood Pressure Monitor says 'The cuff is a little bit high'?
If your ViSAGE Blood Pressure Monitor provides the audible error message 'The cuff is a little bit high, please lower the cuff,' follow the voice command and take the measurement again.
Why does my ViSAGE MD 15469 display 'Lo' and not inflate?
If your ViSAGE Blood Pressure Monitor displays 'Lo' and the cuff is not inflating, the battery charge level is low. Insert four new batteries to resolve this issue.
What to do if ViSAGE MD 15469 Blood Pressure Monitor says 'Low battery, please replace the batteries'?
If your ViSAGE Blood Pressure Monitor provides the audible error message 'Low battery, please replace the batteries,' follow the voice command.
Instructions for correct device operation and intended use.
Outlines disallowed uses and manufacturer liability for improper operation.
General precautions for device usage, focusing on user safety and handling.
Provides guidelines for safe battery usage, charging, and disposal.
Provides instructions on how to accurately measure blood pressure and factors affecting it.
Emphasizes consulting a doctor for diagnosis and medication, warning against self-treatment.
Step-by-step guide for inserting batteries into the device.
Steps for performing a measurement and how the device stores the readings.
A guide to common error codes, their causes, and recommended solutions.
General| Type | Upper Arm Blood Pressure Monitor |
|---|---|
| Measurement Method | Oscillometric |
| Arrhythmia detection | Yes |
| Measurement Range (Pressure) | 0-280 mmHg |
| Display | LCD |
| Accuracy (Pressure) | ±3 mmHg |
| Accuracy (Pulse) | ±5% |
| Power Supply | 4 x AA batteries |
| Measurement Range (Pulse) | 40-200 beats per minute |
To Next Page
