ViSAGE MD 15469 - Powering the Device On;Off

34 of 52
1300 884 987 www.medion.com.au
 Use the or the M button to set the desired language.
 Confirm the entry by pressing the
button.
The display for the volume of the voice output is shown, e.g. ON 1. The
following settings are available: ON 1 (very quiet) to ON 7 (loud) or OF 0
(mute).
 Use the
or the M button to set the desired volume.
 Confirm the entry by pressing the button.
13. Switch the device on or off
 To switch on the device, press the button.
The measurement starts automatically.
 To switch the device off, press the button again.
If you do not press any buttons for around 3 minutes, the device will switch
itself off.
15469_MSN 5004 7183 EN Aldi AUS Content Final REV2.indd 3415469_MSN 5004 7183 EN Aldi AUS Content Final REV2.indd 34 23.09.2014 08:33:3823.09.2014 08:33:38