EasyManua.ls Logo

ViSAGE MD 12450 - User Manual

ViSAGE MD 12450
58 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Upper Arm
Blood Pressure Monitor
Model Number MD 12450
MEDION Australia Pty Ltd
St Leonards, NSW 2065
Australia
helpline: 1300 884 987
Email: australia@medion.com
www.medion.com.au
11/2012
After Sales Support
Telephone: 1300 884 987
Email: australia@medion.com
BBlood Pressure Pass
12450 AUS RC1 Cover_Blutdruckpass.indd 112450 AUS RC1 Cover_Blutdruckpass.indd 1 06.07.2012 11:55:2706.07.2012 11:55:27

Questions and Answers

  • G
    goodwinchloeAug 1, 2025
    What to do if my ViSAGE MD 12450 Blood Pressure Monitor shows a measurement error?
    • C
      Crystal PageAug 1, 2025
      If the ViSAGE Blood Pressure Monitor displays a measurement error, ensure you put the sleeve on correctly and then retake the measurement. See page 33 for guidance.
  • G
    georgejonesAug 5, 2025
    Why is the battery symbol flashing on my ViSAGE MD 12450?
    • J
      jwhiteAug 5, 2025
      If the battery symbol on your ViSAGE Blood Pressure Monitor is flashing, it indicates that the battery power is low. To resolve this, insert four new batteries. Please refer to page 24 for instructions.
  • J
    Joseph AndersonAug 9, 2025
    Why are the results of my ViSAGE MD 12450 Blood Pressure Monitor abnormally high or low?
    • M
      Melissa HoganAug 9, 2025
      If your ViSAGE Blood Pressure Monitor displays abnormally high or low measurement results, several factors could be responsible: * Ensure the sleeve is at heart level during measurement; read the instructions on measuring correctly (page 17). * Verify the sleeve is correctly positioned on your arm; refer to page 33 for guidance. * Check that the sleeve hose is properly connected to the unit; attach the sleeve‘s tube plug correctly.
  • J
    jacksonaustinAug 13, 2025
    What to do if my ViSAGE MD 12450 says the battery power is too low?
    • O
      oliviamendozaAug 13, 2025
      If your ViSAGE Blood Pressure Monitor indicates that the battery power is too low, you should insert four new batteries. See page 24 for instructions.
  • M
    Meghan RhodesAug 18, 2025
    How to fix pulse rate measurement failure on ViSAGE MD 12450 Blood Pressure Monitor?
    • T
      tjohnsonAug 18, 2025
      If the ViSAGE Blood Pressure Monitor fails to measure your pulse rate, make sure you put the sleeve on correctly and then take the measurement again.
  • S
    Sabrina SmithAug 22, 2025
    What to do if the pressure is beyond the measurement range on ViSAGE MD 12450 Blood Pressure Monitor?
    • S
      Shannon CookAug 22, 2025
      If the pressure reading on your ViSAGE Blood Pressure Monitor is beyond the measurement range, read the instructions on measuring correctly (page 17), and measure again after 5 minutes.
  • A
    Anthony LopezAug 27, 2025
    What if the sleeve is not in the right position on the arm when using ViSAGE Blood Pressure Monitor?
    • B
      Brittney RossAug 27, 2025
      If the sleeve is not in the right position on the arm while using your ViSAGE Blood Pressure Monitor, put the sleeve on correctly. See page 33 for instructions.

Summary

Proper Use of the Blood Pressure Monitor

General Safety Instructions

General Safety Guidelines

General safety guidelines for device usage, including supervision and environmental conditions.

Battery Safety Instructions

Safe Handling of Batteries

Guidelines for safely handling batteries to prevent damage or injury.

Device Repairs and Servicing

Measuring Blood Pressure Process

Notes for Correct Measurement

Doctor Diagnosis of Measurements

Appliance Overview

Display Layout

Display Element Descriptions

Preparing the Unit for Use

Inserting Batteries

Step-by-step guide on opening the compartment and inserting batteries.

Initial Basic Settings

Switching the Device On and Off

Measuring Blood Pressure and Pulse

Putting on the Sleeve

Instructions for correctly fitting the arm sleeve for measurement.

Sleeve Positioning

Detailed steps for placing the sleeve on the arm, including tube direction and height.

Sleeve Fit and Connection

Ensuring proper sleeve fit and connecting the tube to the unit.

Posture for Measurement

Recommended sitting posture for accurate blood pressure measurement.

Measuring and Storing Blood Pressure Values

High Blood Pressure Measurement Procedure

Classifying Blood Pressure Readings

Retrieving Saved Values

Error Messages and Troubleshooting

Cleaning, Storing, and Servicing the Unit

ViSAGE MD 12450 Specifications

General IconGeneral
DisplayLCD
Irregular Heartbeat DetectionYes
Measurement MethodOscillometric
Power Source4 x AA batteries
Automatic Shut-offYes
TypeUpper Arm
Memory60 readings
Measurement Range (Pulse Rate)40-180 beats per minute

Related product manuals