ViSAGE MD 12450 - Retrieving Individual Measurements

46
After Sales Support
Telephone: 1300 884 987
Email: australia@medion.com
Retrieving values of individual measurements
Saved message values can be displayed.
 To retrieve the measurement values in memory 1, press button 1 and hold it
down for around 3 seconds.
 To retrieve the measurement values in memory 2, press button 2 and hold it
down for around 3 seconds.
The average values of the last three measurements from the selected memory
will be shown in the display.
If you have switched on language output, this value will also be given verbally.
 Press button 1 or 2 to call up the stored values individually. You can “fl ick”
through the newest to the oldest values by pressing the button.
12450 AUS Final REV1 Content.indd 4612450 AUS Final REV1 Content.indd 46 24.08.2012 14:16:5424.08.2012 14:16:54