38
After Sales Support
Telephone: 1300 884 987
Email: australia@medion.com
Measuring and storing values
If you know that your blood pressure is higher than 230mmHg, proceed as
described on page 41.
Press button 1 or 2 to interrupt the measurement.
Make sure that the air tube is not kinked or being squashed.
NOTE
You can save 30 measurement values in each of the two memories.
To store the values in the fi rst memory, press button 1.
To store the values in the second memory, press button 2.
The selected button will light up.
During measurement, do not move the sleeve or your arm or hand muscles.
After a few seconds, the unit will pump up the sleeve. When the sleeve pressure
is stable, the unit will start measuring automatically.
The current values are shown in the display.
Press button 1 or 2 if you want to interrupt the measurement. The sleeve
defl ates.
12450 AUS Final REV1 Content.indd 3812450 AUS Final REV1 Content.indd 38 24.08.2012 14:16:5324.08.2012 14:16:53
To Next Page
Loading...
