Viscount unico series - Alternative Functions of Register Buttons; Register Button Alternative Functions; Display Backlight; Backlight Control

27
Viscount UNICORadio Remote Control
ALTERNATIVE FUNCTIONS OF REGISTER BUTTONS
The Register button usually control the active stops while playing a MIDI track, but they can
also adjust the speed or transposition of a song.
To switch to the alternative functions, press and hold the [REPEAT] button. The display will
show what function the stops button are now allocated to.
SET FUNCTION
REGISTER
To assign a different function, press the [R+] or [R-] buttons: TRANSPOSE regulates the
transposer of the sequencer (and not the keyboard transposer); TEMPO adjusts the play
speed (percentage). To confirm your choice and exit this screen wait a few seconds or press
either [PLAY] or [STOP].
DISPLAY BACKLIGHT
The display backlight turns on when a button is pressed, and stays on for three seconds
thereafter. This reduces the energy consumption when the remote is not in use.
To increase even further the batteries life span, the backlight can be turned off completely.
To do so, press and hold the [LIST] button.
SET BACKLIGHT
ON
Press [R+] or [R-] and then select YES to keep the standard backlight mode, NO to disable
the backlight. To confirm, wait for a few seconds or press either [PLAY] or [STOP].