VISIOMED THERMOFLASH LX-26 User Manual

MEDICAL INFRARED NO CONTACT THERMOMETER
- LX-26 MODEL
ENGLISH
USER MANUAL

VISIOMED THERMOFLASH LX-26 Specifications

General

Type	Infrared Thermometer
Measurement Site	Forehead
Response Time	1 second
Display	LCD
Power Source	2 x AAA batteries
Measurement Range	32°C to 42.9°C
Automatic Shut-off	Yes
Accuracy	±0.2°C

Summary

I. SAFETY PRECAUTIONS

II. INTRODUCTION

III. PRECAUTIONS BEFORE USE

IV. OPERATING PRINCIPLE

V. DESCRIPTION OF THE ThermoFlash LX-26

VI. FUNCTIONS

VII. USE

VIII. CONFIGURATION AND FUNCTION OF MENU

1. CHOOSING THE TEMPERATURE UNIT – F1 FUNCTION

Select the temperature unit (Celsius or Fahrenheit) via the F1 menu setting.

2. ALARM SETUP – F2 MENU

Configure the temperature alarm threshold using the F2 menu.

3. CHOICE OF DISPLAY MODE: BODY OR SURFACE TEMP – F3 MENU

Select display mode (Body or Surface Temp) using the F3 menu.

4. TOTAL DIFFERENCE – F4 MENU

Adjust the total variation or difference setting via the F4 menu.

5. BUZZER ON/OFF – F5 MENU

Enable or disable the audible buzzer through the F5 menu setting.

6. EXITING THE SETTING MODE

Procedure to exit the device's setting mode.

7. DATA MEMORY

Access and review the last recorded temperature measurements.

IX. TECHNICAL CHARACTERISTICS

X. ADVICE

XI. ACCESSORIES SUPPLIED

XII. TROUBLESHOOTING