Why VISIOMED ThermoFlash LX-26E EVOLUTION Thermometer readings are too close together?
If temperature readings are too close together, the VISIOMED Thermometer may not have enough time to boot itself. Ensure a minimum pause of 15 seconds between readings; a 1-minute pause is advisable.
What to do if measuring distance is too far with VISIOMED ThermoFlash LX-26E EVOLUTION?
If the measuring distance is too far from the VISIOMED Thermometer, ensure you are respecting the recommended measuring distance, which is between 5 and 8 cm (approximately 2 to 3.14 inches).
How to fix VISIOMED ThermoFlash LX-26E EVOLUTION temperature reading hampered by hair or perspiration?
If the temperature reading is hampered by hair or perspiration when using the VISIOMED Thermometer, make sure that there is no obstruction prior to taking a temperature.
Why VISIOMED ThermoFlash LX-26E EVOLUTION Thermometer temperature hampered by an air flux?
If the temperature reading is hampered by an air flux when using the VISIOMED Thermometer, make sure there is no air flux, as this could interfere with the infrared system.
What does HI mean on VISIOMED Thermometer?
The message 'HI' on the VISIOMED Thermometer screen indicates that the temperature is above 42.9°C (109°F) in Body Mode or above 60°C (140°F) in Surface Temp Mode.
What does LO mean on VISIOMED ThermoFlash LX-26E EVOLUTION Thermometer?
The message 'Lo' on the VISIOMED Thermometer screen indicates that the temperature being analyzed is below the selected measuring range: less than 32°C (90°F) in Body Mode or less than 0°C (32°F) in Surface Temp Mode.
What to do if VISIOMED Thermometer displays body temperature inferior to 32°C (89.6°F)?
If the VISIOMED Thermometer screen displays a body temperature below 32°C (89.6°F), select the BODY mode to measure body temperature.
How to fix VISIOMED ThermoFlash LX-26E EVOLUTION screen displaying temperature superior to 95°?
If the VISIOMED Thermometer screen displays a temperature above 95°, change the measurement unit to Celsius.
Essential steps and considerations before operating the thermometer.
Step-by-step instructions and factors for stable, reliable temperature readings.
Details operating conditions, measuring ranges, and accuracy specifications.
Explains the meaning of 'HI' and 'LO' readings and how to resolve them.
General| Type | Infrared Thermometer |
|---|---|
| Measurement Site | Forehead |
| Measurement Method | Non-contact |
| Measurement Range | 32.0°C to 42.9°C (89.6°F to 109.2°F) |
| Display | LCD |
| Memory Capacity | 32 readings |
| Power Source | 2 x AAA batteries |
| Response Time | < 1 second |
| Auto Power Off | Yes (after 30 seconds of inactivity) |
| Weight | 80g (without batteries) |
| Accuracy | ±0.2°C (±0.4°F) between 35.5°C and 42.0°C (±0.3°C or ±0.5°F outside this range) |
To Next Page
