Vision Fitness T8200HRC User Manual

T8200HRC/T8400HRC TREADMILL
OWNER’S MANUAL SUPPLEMENT
Elevation
Speed
Function
PPrrooggrraammmmiinngg
The T8200HRC and T8400HRC has built in heart rate control along with 6 programs from intervals to weight loss, each of
the programs has nine different levels. Use either the UP or DOWN arrows to choose the Heart Rate Control program.
Press SELECT. The function light “HR” will be flashing and “H 80” will show in the number screen. You can choose a target
heart rate from 80 to 190 in 5 beat increments by pressing the UP or DOWN arrows. Once your selected target level is
showing in the number screen, press SELECT. A set time of “34:00” will be flashing in the number screen. You may
choose a time between 15 minutes and 99 minutes by pressing the UP or DOWN arrows. When the time you choose is
showing in the number screen, press Select. When you are ready to begin press START. *
For instructions on calculating your target heart rate refer to page 34 of the Treadmill Owner’s Manual. All other
programming instructions can be found on page 14 of the Treadmill Owner’s Manual.
* Please note there is a 5 minute warm-up period before program will make elevation
Changes

Vision Fitness T8200HRC Specifications

General

Brand	Vision Fitness
Model	T8200HRC
Category	Treadmill
Language	English

Summary

Treadmill Programming

Heart Rate Control Program

Utilize UP/DOWN arrows for Heart Rate Control, press SELECT to confirm target heart rate and time.

Chest Strap Instructions

Moistening Transmitter Electrodes

Prepare transmitter electrodes by moistening rubber strips with water for signal conductivity.

Placing Strap Around Chest

Center transmitter below pectoral muscles against skin, adjust belt for secure, comfortable fit.

Heart Rate Feedback

Monitor heart rate by pressing SELECT to show HR readout on screen during program operation.

Determining Target Heart Rate

Consult physician for sedentary individuals or those with heart disease for target heart rate guidance.