What to do if the MCB or PCB on my Vision Fitness T9450HRT is not operating?
If your Vision Fitness Treadmill's MCB or PCB isn't working, begin by checking all connections, the power switch, the circuit breaker, and the fuse. Also, inspect fuse F1 to ensure it is in good condition.
What to do if the PCB powers up but the MCB will not operate on my Vision Fitness Treadmill?
If the PCB of your Vision Fitness Treadmill powers up, but the MCB doesn't operate, first, check that the line voltage is sufficient. If the voltage is adequate, the MCB may be damaged and should be returned to the manufacturer.
General| Incline | 0-12% |
|---|---|
| Speed | 0.5-12 mph |
| Weight Capacity | 325 lbs |
| Folding | Yes |
| Heart Rate Monitoring | Contact and Wireless |
To Next Page
