Need help?Do you have a question about the Vision Fitness T9800S and is the answer not in the manual?
General| Running Surface | 20" x 60" |
|---|---|
| Speed Range | 0.5 - 12 mph |
| Incline Range | 0 - 15% |
| Motor | 3.0 HP Continuous Duty |
| Heart Rate Monitoring | Contact and Telemetric |
Details the console display fields and physical keys on the T9800 series Vision Fitness treadmill.
Explains the different operational modes the console software enters upon startup.
Describes how to navigate through the various menu items within the User Engineering Mode.
Lists and defines the configurable parameters available in the User Engineering Mode.
Explains how to navigate the main Engineering Mode menu structure and sub-menus.
Details the settings and parameters available within the console's Configuration menu.
Outlines the various diagnostic tests that can be performed in Engineering Mode.
Steps to access the Engineering Mode to begin system calibration procedures.
Procedures to adjust the minimum and maximum elevation settings for calibration.
Procedure to set the effective diameter for accurate speed calculation.
Initiates the automated calibration routine for system parameters like PWM and elevation.
Lists and describes all error codes generated by the treadmill system.
Troubleshooting steps and solutions for errors related to treadmill elevation movement.
Troubleshooting steps and solutions for errors related to treadmill speed movement.
Troubleshooting steps and solutions for general system operation malfunctions.
To Next Page