6
STABILIZING THE BIKE
After positioning your Bike in
its intended location, check
its stability by attempting to
rock it side to side. Rocking
or wobbling indicates that
the Bike needs to be leveled.
Determine which leveler is
not resting completely on
the floor. Loosen the wing
nut at the base of the leveler
to allow the leveler to rotate.
Now rotate the leveler to the
left or right until your Bike is
stable. Lock the adjustment
by tightening the wing nut
against the rear foot support.
SEAT POSITIONING
To determine proper seat position, sit on the seat and position
the ball of your foot on the center of the pedal. Your knee
should bend slightly at the furthest pedal position. You should
be able to pedal without locking your knees or shifting your
weight from side to side.
BIKES
To Next Page
Loading...
Need help?
General
