What to do if the MCB or PCB on my Vision Fitness Vision is not operating?
If your Vision Fitness Treadmill's MCB or PCB isn't working, begin by checking all connections, the power switch, the circuit breaker, and the fuse. Also, inspect fuse F1 to ensure it is in good condition.
What to do if the PCB powers up but the MCB will not operate on my Vision Fitness Vision?
If the PCB of your Vision Fitness Treadmill powers up, but the MCB doesn't operate, first, check that the line voltage is sufficient. If the voltage is adequate, the MCB may be damaged and should be returned to the manufacturer.
General| Brand | Vision Fitness |
|---|---|
| Model | Vision Series |
| Category | Treadmill |
| Language | English |
Guidelines for properly grounding the treadmill to prevent electrical shock hazards.
Explanations of what each LED on the MCB indicates for diagnosis and repair.
A troubleshooting guide correlating LED status with problems and corrective actions.
Possible causes and fixes for a treadmill console that shows no display.
Troubleshooting steps for unstable running speed, including voltage and belt tension checks.
Steps to diagnose and resolve issues preventing the treadmill from powering on or starting.
Troubleshooting guide for when the incline feature fails to operate.
Procedure for replacing the Main Circuit Board (MCB) on T7400/8400/8500/8600 models.
Procedure for replacing the MCB on T-7200/8200 models.
Instructions for replacing the Printed Circuit Board (PCB) on T7400/8400/8500/8600 models.
Procedure for replacing the PCB on T-7200/8200 models.
Instructions for replacing the running belt, deck, or rollers on JET-7200/8200 models.
Procedure for replacing running belt, deck, or rollers on T-7200/8200 models.
Guide to replacing the running belt, deck, or rollers on T7400/8400/8500/8600 models.
Procedure for replacing the motor on T7200/8200 treadmill models.
Instructions for replacing the motor on T7400/8400/8500/8600 treadmill models.
Procedure for replacing the incline motor on T7200/8200 treadmill models.
To Next Page