Vision Tech Shop TVP Series User Manual

TVP Series Quick Start Guide
1. Connect the TVP series scale and DLP-50 label printer with their corresponding power
adapters. The power adapter for the DLP-50 or DEP-50 has a white label attached to the cord.
Do not swap the power adapters.
2. Connect both devices with the RS-232 cable.

Vision Tech Shop TVP Series Specifications

General

Brand	Vision Tech Shop
Model	TVP Series
Category	Scales
Language	English

Summary

Connecting Scale and Printer

Connect Power Adapters

Connect the TVP series scale and DLP-50 label printer using their corresponding power adapters, noting the white label on the DLP-50/DEP-50 adapter cord.

Connect RS-232 Cable

Connect both the TVP series scale and the DLP-50 label printer using the RS-232 cable.

Printing Operation

Weighing Object for Printing

Place an object on the scale that weighs more than the minimum capacity before printing.

Entering Unit Price

Enter the unit price of the object and press the M+ key to initiate printing.

Scale Parameter Settings

Accessing the Menu

Turn on the scale, press and hold TARE during self-test, enter default PIN '0000' to access the parameter menu.

RS-232 Configuration

Navigate to 'F11 rS232' menu using TARE and ZERO keys to configure RS-232 protocol, Baud rate, and data bits.

Unit Selection

Use the UNIT key to select 'kg', 'lb', or 'oz' for normal weighing mode display.