Need help?Do you have a question about the Vision PREMIUM DSP 10-300kVA and is the answer not in the manual?
Ensures UPS remains vertical during transport. Check floor support.
Inspect packages for damage. Remove packaging. Use equipment to move UPS.
Recommended storage conditions and periodic charging guidelines.
Environmental and access requirements for UPS placement.
Details safety requirements for restricted access locations and environmental conditions.
Specifies mains and bypass input protection devices and cable cross-sections.
General information on making connections, including safety warnings and terminal layout.
Details terminal connections for 10-30kVA 3Ph output UPS models.
Illustrates terminal connections for 40-60kVA UPS models.
Shows terminal connections for 120-160-200 kVA UPS models.
Details terminal connections for 250-300kVA models.
Explains the importance of earthing and how to connect PE terminals for safety.
Provides instructions for connecting mains input phases and neutral.
Details the optional connection of a separate bypass mains input.
Guides on connecting external batteries, including safety precautions.
Explains how to connect loads to the UPS output terminals.
Details how the UPS operates in bypass mode, its conditions, and limitations.
Describes the UPS operation using rectifier and inverter for stable output.
Explains UPS operation powered by batteries via the inverter.
Overview of the front panel components: mimic panel, LCD, and keypad.
Explains the functions of the UP, DOWN, ENTER, and ESC buttons on the keypad.
Defines the meaning of various LEDs on the mimic panel indicating UPS status.
Describes the LCD structure, menu navigation, and operating mode notations.
Lists and defines various alarm codes (A01-A44) for UPS abnormal conditions.
Details available measurements and command functions for UPS configuration and control.
Explains system date/time configuration, event logging, and identification menus.
Describes the buzzer's role in signaling alarms and how to manage its state.
Step-by-step guide for initial UPS setup and startup.
Instructions for safely shutting down and removing the UPS from service.
Procedure for switching to manual bypass for maintenance without load interruption.
Steps to safely return the UPS from manual bypass mode to normal inverter operation.
Guidance on connecting the UPS to a generator for enhanced operation.
Explains the benefits and requirements for connecting Premium DSP UPS units in parallel.
Steps for initial setup and startup of UPS units configured for parallel operation.
Details communication cable connections between UPS units for parallel operation.
Guides on configuring UPS units for parallel operation, including number and redundancy settings.
Procedure to switch the parallel system to static bypass mode from the LCD panel.
Steps to transfer the parallel system to manual bypass using the bypass switch.
Instructions for safely powering down the entire parallel UPS system.
Specifies acceptable mains voltage and frequency ranges for normal UPS operation.
Defines acceptable bypass mains voltage, frequency, and THD for bypass operation.
Instructions for performing a battery test to check battery health and condition.
Explains how the UPS handles overloads and its transition to bypass mode.
Details the UPS's electronic protection against short circuits on the output.
Pin layout and specifications for RS232 serial communication.
Pin layout and specifications for RS422 serial communication.
Explains the function of UPS OFF and GEN ON digital inputs.
Details specifications and applications for free contact relay communication.
Describes the functions of AC failure, bypass, battery under voltage, and secure bus failure relays.
Instructions for replacing battery fuses and recommended fuse types.
Information on battery life, maintenance, and disposal, including safety warnings.
Recommendations for preventive replacement of cooling fans.
Recommendations for preventive replacement of electrolytic capacitors.
Provides a table of common alarms, their possible causes, and recommended actions.
Lists additional alarms, causes, and troubleshooting steps for UPS issues.
Details further alarms, their causes, and actions to resolve them.
Ensures UPS remains vertical during transport. Check floor support.
Inspect packages for damage. Remove packaging. Use equipment to move UPS.
Recommended storage conditions and periodic charging guidelines.
Environmental and access requirements for UPS placement.
Details safety requirements for restricted access locations and environmental conditions.
Specifies mains and bypass input protection devices and cable cross-sections.
General information on making connections, including safety warnings and terminal layout.
Details terminal connections for 10-30kVA 3Ph output UPS models.
Illustrates terminal connections for 40-60kVA UPS models.
Shows terminal connections for 120-160-200 kVA UPS models.
Details terminal connections for 250-300kVA models.
Explains the importance of earthing and how to connect PE terminals for safety.
Provides instructions for connecting mains input phases and neutral.
Details the optional connection of a separate bypass mains input.
Guides on connecting external batteries, including safety precautions.
Explains how to connect loads to the UPS output terminals.
Details how the UPS operates in bypass mode, its conditions, and limitations.
Describes the UPS operation using rectifier and inverter for stable output.
Explains UPS operation powered by batteries via the inverter.
Overview of the front panel components: mimic panel, LCD, and keypad.
Explains the functions of the UP, DOWN, ENTER, and ESC buttons on the keypad.
Defines the meaning of various LEDs on the mimic panel indicating UPS status.
Describes the LCD structure, menu navigation, and operating mode notations.
Lists and defines various alarm codes (A01-A44) for UPS abnormal conditions.
Details available measurements and command functions for UPS configuration and control.
Explains system date/time configuration, event logging, and identification menus.
Describes the buzzer's role in signaling alarms and how to manage its state.
Step-by-step guide for initial UPS setup and startup.
Instructions for safely shutting down and removing the UPS from service.
Procedure for switching to manual bypass for maintenance without load interruption.
Steps to safely return the UPS from manual bypass mode to normal inverter operation.
Guidance on connecting the UPS to a generator for enhanced operation.
Explains the benefits and requirements for connecting Premium DSP UPS units in parallel.
Steps for initial setup and startup of UPS units configured for parallel operation.
Details communication cable connections between UPS units for parallel operation.
Guides on configuring UPS units for parallel operation, including number and redundancy settings.
Procedure to switch the parallel system to static bypass mode from the LCD panel.
Steps to transfer the parallel system to manual bypass using the bypass switch.
Instructions for safely powering down the entire parallel UPS system.
Specifies acceptable mains voltage and frequency ranges for normal UPS operation.
Defines acceptable bypass mains voltage, frequency, and THD for bypass operation.
Instructions for performing a battery test to check battery health and condition.
Explains how the UPS handles overloads and its transition to bypass mode.
Details the UPS's electronic protection against short circuits on the output.
Pin layout and specifications for RS232 serial communication.
Pin layout and specifications for RS422 serial communication.
Explains the function of UPS OFF and GEN ON digital inputs.
Details specifications and applications for free contact relay communication.
Describes the functions of AC failure, bypass, battery under voltage, and secure bus failure relays.
Instructions for replacing battery fuses and recommended fuse types.
Information on battery life, maintenance, and disposal, including safety warnings.
Recommendations for preventive replacement of cooling fans.
Recommendations for preventive replacement of electrolytic capacitors.
Provides a table of common alarms, their possible causes, and recommended actions.
Lists additional alarms, causes, and troubleshooting steps for UPS issues.
Details further alarms, their causes, and actions to resolve them.
General| Power Rating | 10-300kVA |
|---|---|
| Battery Type | Sealed Lead-Acid (SLA) |
| Input Voltage | 380/400/415V |
| Input Frequency | 50/60Hz |
| Output Voltage | 380/400/415V |
| Output Frequency | 50/60Hz ± 0.1% |
| Efficiency | Up to 96% |
| Communication Interface | RS232, USB, SNMP |
| Operating Temperature | 0°C to 40°C |
| Humidity | 0% to 95% (non-condensing) |
| Dimensions | Varies by model (consult manual) |
| Weight | Varies by model |
To Next Page
