Visonic POWERMAX REMOTE - PROGRAMMER SOFTWARE - Site Information Table

6-2___________________________________________________________Data Details Tables
6.1 Site Information
Site Information displays general information about the site control panel.
Panel Site Name:
The name of the site where the control panel is installed. By default this
field receives the name of the PowerMax model detected.
System Manager:
The name of the System Manager responsible for programming the
control panel, responding to alarms and other events.
Address, City, State, and Zip Code:
The complete address of the site.
Panel Phone No.
∗
: The telephone number which the PC modem uses to connect to the
control panel.
Additional Information:
Additional important information about the PowerMax site and
facilities.
Primary Phone No.
∗∗
: The first telephone number the control panel dials.
Primary Communication Mode
∗∗
: The mode used to call a primary telephone number.
Secondary Phone No.
∗∗
: When the primary telephone number is engaged, the PowerMax
Remote Programmer dials this telephone number.
Secondary Communication Mode
∗∗
: The mode used to call a secondary telephone number.
Note:
If there is no entry for the secondary telephone number, the PowerMax Remote
Programmer will dial the primary telephone only.
Note:
If the dialed telephone number is engaged or there is no answer, the PowerMax
Remote Programmer will toggle between the primary telephone number and the secondary
telephone number.
Time Zone:
Select from the list the relevant time zone.
Download Code:
A 4-digit password, including letters A-F, used to enable downloading
data to the control panel.
Installer Code:
A 4-digit password used to manage the control panel via the built-in
keypad.
∗
Available in PowerMax only.
∗∗
Available in PowerMax+ only.