Visonic POWERMAX

USER SETTINGS
DE5467U 29
Enabling the Squawk Option
You can determine that the system will activate (or
not activate) high/mid/low siren sound, for a short
time, upon arming (1 beep) and disarming (2 beeps),
by keyfob only.
Having entered your Master User Code
successfully
(see above - Entering the User Settings Menu), click
the NEXT button (repeatedly, if necessary) until the
display will read:
SQUAWK OPTION
From here, proceed as follows:
PRESS
RESULTANT DISPLAY
squawk disable
(if this is the current option)
squawk low volume
If not
satisfied -
squawk mid volume
If not
satisfied -
squawk hi volume
If not
satisfied
squawk hi volume
If satisfied
For wired siren, refer to "low", "mid" and "hi" options
as "squawk enable".
You
may now select any other item on the USERS
SETTINGS menu or quit the programming process by
clicking <NEXT>. When "<OK> TO EXIT" is displayed,
click OK.
Setting Time and Time Format
Having entered your Master User Code successfully
(see Entering the User Settings Menu, above), click
<NEXT> until the display reads:
SET TIME&FORMAT
A. If 12h format is desired, continue as follows:
PRESS
RESULTANT DISPLAY
US FORMAT - 12H
(if this is the current option)
TIME _ _ : _ _ A
TIME 12:55A
(time
digits] (e.g.
12:55A)
TIME HH:MM A
Note: To enter “A” - press [] or to enter “P” - press [#].
B. If 24h format is desired, continue as follows:
PRESS
RESULTANT DISPLAY
US FORMAT - 12H
EU FORMAT - 24H
TIME _ _ : _ _
TIME 19:55
[time
digits] (e.g.
19:55)
TIME 19:55
TIME HH:MM
You may now select any other item on the USER
SETTINGS menu or quit programming by clicking
<AWAY>. When <OK> TO EXIT is displayed - click
<OK>.
Setting the Date and Date Format
Having entered your Master User Code successfully
(see above - Entering the User Settings Menu), click
NEXT button (repeatedly, if necessary) until the
display will read SET DATE&FORMAT.
From here, proceed as follows:
PRESS
RESULTANT DISPLAY
DATE MM/DD/YYYY
DATE DD/MM/YYYY
If not satisfied
DATE _ _ / _ _ /_ _ _ _
DATE 01/01/2002
[Enter date]
(e.g.
01/01/2002)
DATE 01/01/2002
DATE DD/MM/YYYY
You may now select any other item on the USER
SETTINGS menu or quit programming by clicking
<AWAY>. When <OK> TO EXIT is displayed - click
<OK>.