Visonic POWERMAXEXPRESS

6 D-303973 PowerMaxExpress Installer's Guide
4
Drill 4 holes and insert wall anchors
Back unit
Mark 4 drilling points on mounting surface
3
Fasten the back unit with 4 screws
5
1
Release
screws
Remove
front
cover
Figure 3.1 – Back Unit Mounting
CABLES ROUTING GUIDE
Cables entry
possibilities
1
Remove the left or right side
cables entry knockout(s) and
enter the required cable(s).
Cable clips
Remove and use as
cable clamp(s)
2
(example)