Vissani QR026 User Manual (English)

Questions and Answers:

M
Mary FowlerAug 1, 2025
How to improve venting in Vissani Ventilation Hood?
- M
  meghanpatrickAug 1, 2025
  To ensure your Vissani Ventilation Hood vents properly, verify the distance between the cooktop and the hood's bottom is between 458 mm (18 in.) and 710 mm (28 in.). Confirm that the ductwork meets all requirements, using round metal ducts with a uniform diameter of 152 mm (6 in.), and that the ductwork length does not exceed 10.7 m (35 ft). Reduce duct length and the number of elbows if needed, and properly connect, seal, and tape all joints. Ensure the duct does not open against the wind and that the power is set to high speed for heavy cooking. Also, close windows and doors to eliminate outside airflow, which can affect performance.
T
Tyler GravesAug 6, 2025
Why are the fans weak on my Vissani QR026?
- D
  David WhiteAug 6, 2025
  If your Vissani Ventilation Hood fan seems weak, first ensure the duct size is at least 152 mm (6 in.), as insufficient duct size impairs efficiency. Next, check for any clogs in the duct or restrictions from tight mesh on the wall cap. Lastly, verify that the damper unit is opening correctly, if your unit has one.
R
Roger CooperAug 11, 2025
What to do if the Vissani QR026 Ventilation Hood fan is not spinning?
- B
  Beth PowellAug 11, 2025
  If the lights on your Vissani Ventilation Hood work but the fan isn't spinning, is stuck, or is rattling, it's possible the thermal protection system has shut the motor down because it was too hot. In this case, the motor should function properly after the thermal protection system cools down, which usually takes about 10 minutes. Check to ensure the fan isn’t jammed or scraping. If these steps don't resolve the issue, the motor may be defective and require replacement.
M
Madison GlennAug 16, 2025
Why does my Vissani QR026 vibrate when the fan is on?
- S
  Samantha ValenciaAug 16, 2025
  If your Vissani Ventilation Hood vibrates when the fan is operating, check that the hood is securely attached to the wall or cabinet and tighten if necessary. Also, make sure the motor is secured in place; tighten it if it's loose. Finally, inspect the fan for damage and replace it if needed.
B
Brooke CookAug 21, 2025
How to troubleshoot a Vissani QR026 Ventilation Hood that won't turn on?
- M
  Michael DicksonAug 21, 2025
  If your Vissani Ventilation Hood won't operate, check that the power supply cable and all electrical wiring are properly connected. Ensure that the power is turned on at the junction box or circuit breaker. Also, verify that the wiring between the switch board and the control board are connected properly.
A
andrew73Aug 27, 2025
What to do if the light doesn't work on Vissani QR026?
- A
  Andrew HodgesAug 27, 2025
  If a light on your Vissani Ventilation Hood does not work, first check if the bulb is loose and tighten it. If that doesn't work, remove the bulb and insert one that you know is working. If the properly functioning light does not come on, the light assembly may be the problem and should be serviced or replaced.

Vissani QR026 Specifications

General

Brand	Vissani
Model	QR026
Category	Ventilation Hood
Language	English

Summary

Safety Information

General and Installation Safety

Covers general usage safety and specific precautions for installation.

Critical Safety Alerts

Dangers and warnings related to electrical shock, gas, sharp edges, and fan operation.

Safety Information Continued

Cooking and Cleaning Safety

Guidelines for safe cooking practices and procedures for cleaning the range hood.

Additional Safety Precautions

Warnings and cautions regarding duct work, speed controls, ventilation use, and installation lifting.

Warranty Information

One-Year Manufacturer Defect Warranty

Details the terms and conditions of the one-year warranty for material and workmanship defects.

Warranty Claim Procedure

Outlines the steps and requirements for submitting a warranty claim for defects.

Pre-Installation Guide

Tools Required for Installation

Lists all necessary tools for the installation of the range hood.

Hardware Included with Unit

Details the specific hardware parts provided with the range hood for installation.

Pre-Installation: Package Contents and Specifications

Package Contents Overview

Lists and illustrates all the components included in the range hood package.

Technical Specifications

Provides technical specifications like dimensions, voltage, CFM, and light bulb wattage.

Pre-Installation: Installation Planning and Cutouts

Planning, Measurement, and Cabinet Cutouts

Guides on planning installation, measurements, and cabinet preparation for venting.

Pre-Installation: Venting and Ducting Details

Back Wall Cutout and Duct Work Guidelines

Instructions for back wall cutouts and guidelines for duct work installation.

Inside Venting System Reference

Refers to diagrams for inside venting systems and charcoal filter usage.

Installation Procedures

Hole Removal and Electrical Testing

Steps for removing knock-out holes, venting holes, and testing electrical connections.

Electrical Connection Safety

Dangers and notes regarding electrical grounding, wire types, and conduit connectors.

Installation Procedures Continued

Installing the Damper

Guides on how to install the damper for venting systems.

Installing the Charcoal Filter

Instructions for installing the charcoal filter for ductless ventilation.

Installation Procedures Continued

Placing and Securing the Range Hood

Steps for lifting and securely mounting the range hood to the cabinet.

Final Connections and Power Up

Instructions for connecting vent work and reconnecting power supply.

Operating the Range Hood

Turning On and Off

How to operate fan speeds, turn on lights, and turn off the unit.

Maintenance and Care

Filter and Light Bulb Replacement

Guidance on replacing filters and burnt-out light bulbs.

Maintenance Safety Precautions

Dangers and warnings related to performing maintenance tasks on the range hood.

Care and Cleaning Guide

Range Hood Cleaning Procedures

Recommendations for cleaning the exterior and interior of the range hood.

Cleaning Do's and Don'ts

Lists what to do and not to do when cleaning the range hood to avoid damage.

Care and Cleaning Continued

Filter Cleaning and Troubleshooting

Advice on cleaning filters and initial troubleshooting steps for common issues.

Troubleshooting Guide

Fan, Venting, and Light Issues

Solutions for fan problems, improper venting, and non-functional lights.

Troubleshooting Diagrams

Wiring Diagram

A schematic showing the electrical connections of the range hood components.

External Component Diagram

Exploded view diagrams with dimensions for the range hood.

Service Parts Identification

Replacement Parts List

Lists all available service parts with their codes and quantities.

Related product manuals

Vissani 1803B/HP11(75)

Vissani QR026 User Manual

Table of Contents

Questions and Answers:

Vissani QR026 Specifications

Summary

Safety Information

General and Installation Safety

Critical Safety Alerts

Safety Information Continued

Cooking and Cleaning Safety

Additional Safety Precautions

Warranty Information

One-Year Manufacturer Defect Warranty

Warranty Claim Procedure

Pre-Installation Guide

Tools Required for Installation

Hardware Included with Unit

Pre-Installation: Package Contents and Specifications

Package Contents Overview

Technical Specifications

Pre-Installation: Installation Planning and Cutouts

Planning, Measurement, and Cabinet Cutouts

Pre-Installation: Venting and Ducting Details

Back Wall Cutout and Duct Work Guidelines

Inside Venting System Reference

Installation Procedures

Hole Removal and Electrical Testing

Electrical Connection Safety

Installation Procedures Continued

Installing the Damper

Installing the Charcoal Filter

Installation Procedures Continued

Placing and Securing the Range Hood

Final Connections and Power Up

Operating the Range Hood

Turning On and Off

Maintenance and Care

Filter and Light Bulb Replacement

Maintenance Safety Precautions

Care and Cleaning Guide

Range Hood Cleaning Procedures

Cleaning Do's and Don'ts

Care and Cleaning Continued

Filter Cleaning and Troubleshooting

Troubleshooting Guide

Fan, Venting, and Light Issues

Troubleshooting Diagrams

Wiring Diagram

External Component Diagram

Service Parts Identification

Replacement Parts List

Related product manuals