Need help?Do you have a question about the vita Vacumat 500 and is the answer not in the manual?
General| Firing chamber volume | Ø 90 mm/3.54 inch, height 80 mm/3.15 inch |
|---|---|
| Firing tray usable area | Ø 90 mm |
| Max. firing temperature | 1200 °C |
| Temperature accuracy | +/- 1 °C |
| Vacuum | Yes |
| Programs | 200 |
| Voltage | 220 – 240 V, 50/60 Hz or 100 – 120 V, 50/60 Hz |
| Power consumption | max. 1.5 kW |
| Dimensions (W x H x D) | 320 x 370 x 470 mm / 12.6 x 14.6 x 18.5 inch |
| Weight | 28 kg / 62 lbs |
| Type | Firing furnace |
| Power Source | Electrical |
| Capacity | Firing chamber volume: Ø 90 mm/3.54 inch, height 80 mm/3.15 inch |
| Usage | Dental ceramic firing |
Precautions before electrical connection and safe operation.
Steps for positioning the furnace and connecting power and vacuum.
Instructions for powering on the furnace and placing the firing tray.
Shows temperature/program status and controls pre-drying settings.
Emphasizes qualified technicians and power disconnection.
Detailed instructions for removing and replacing the muffle.
Lists common errors (Err 1-4, Err M) and their potential causes.
To Next Page
