Need help?Do you have a question about the Vitalograph copd-6 4000 and is the answer not in the manual?
General| Parameters Measured | FEV1, FEV6, FEV1/FEV6 Ratio |
|---|---|
| Connectivity | USB |
| Power Supply | Rechargeable battery |
| Type | COPD Screener |
| Volume Accuracy | ±3% or 0.05L, whichever is greater |
| Flow Accuracy | ±5% or 0.2 L/s, whichever is greater |
| Volume Range | 0 - 9.99 L |
| Measurement Range FEV1 | 0 - 9.99 L |
| Measurement Range FEV6 | 0 - 9.99 L |
| Display | LCD |
| Battery Life | Up to 500 tests |
| Operating Temperature Range | 10°C to 40°C |
| Operating Humidity | 10 to 90% RH |
| Storage Temperature | -20°C to 50°C |
| Storage Humidity | 10 to 90% RH |
Lists key features like early COPD detection, FEV1/FEV6 display, and risk identification.
Details on inputting subject's age, height, gender, and population group for accurate predictions.
Step-by-step guide on how to conduct a spirometry test with the device and subject instructions.
Configuration of the device to interpret test results based on GOLD standards for COPD classification.
Instructions on how to access and view the results of the most recent test session performed.
Guidelines for cleaning the device and mouthpiece for individual use, emphasizing isopropyl alcohol.
Procedures for multi-patient use, recommending filters and cleaning protocols to prevent cross-contamination.
Specifies the device's intended use for measuring lung function in adults and children aged 5+.
To Next Page
