Need help?Do you have a question about the Vitalograph In2itive 2120 and is the answer not in the manual?
General| Device Type | Spirometer |
|---|---|
| Model Number | 2120 |
| Brand | Vitalograph |
| Measurement Parameters | FEV1, FVC, PEF |
| Measurement Range PEF | 0 - 16 L/s |
| Battery | Rechargeable Lithium-Ion |
| Accuracy FEV1, FVC | ±3% or ±0.05 L, whichever is greater |
| Accuracy PEF | ±5% or 0.2 L/s |
| Display | Color LCD touchscreen |
| Connectivity | USB |
| Battery Life | Up to 8 hours of normal use |
| Operating Temperature | 10 - 40°C |
| Storage Temperature | -20 - 60 °C (-4 - 140 °F) |
| Humidity Range | 10% - 95% RH non-condensing |
Details on the rechargeable battery pack and its charging methods.
Information on battery status indicators and low battery warnings.
Steps for entering patient details before starting a test session.
Procedure for conducting a complete spirometry test session.
Pre-test checks to ensure accurate spirometry readings.
Procedure for conducting a Vital Capacity test.
Procedure for conducting a Forced Vital Capacity test.
Guidance on how test sessions are saved to the database.
Procedure for conducting a post-drug administration test session.
Managing and recalling test sessions stored permanently on the device.
How to print and view recorded spirometry test results.
Instructions on how to delete the current test session.
Situations and frequency for performing accuracy checks.
Customizing test screen display and settings for user requirements.
Managing device memory, including defragmentation and deletion.
Procedures for calibrating the device using a precision syringe.
Adjusting device settings like Date/Time, Sound Options, and Units.
Enabling or disabling device sounds like Key, Flow, Error, and Welcome.
Using the incentive device for testing children and setting prediction values.
Selecting measurement units between Metric and US (Imperial).
Configuring auto power down time and display dimming for battery saving.
Selecting test parameters to be included in reports.
Configuring default subject view and optional data entry fields.
Setting device behavior for automatic navigation after power up or tests.
Configuring which data and graphs appear in test session reports.
Selecting print destination (PC/printer) and report format (single/multi-page).
Procedures for cleaning and disinfecting the spirometer and its parts.
Step-by-step guide to detach the Fleisch flowhead from the device.
Instructions for correctly reattaching the Fleisch flowhead.
To Next Page
