Vitamix 5300 - Control Panel

9
CONTROL PANEL
4
3
1
On/O Switch (l)/(O): The On/O Switch controls the power to the machine
base. The On/O Switch is located on the front of the machine. Move the On/
O Switch to the O (O) position at night and whenever the machine is left
unattended.
Start ( ) / Stop ( ) Switch: Before starting, always make sure that the Variable
Speed Dial is pointed at Variable Speed 1. Pressing down on the Start/Stop
Switch will initiate the blending process. Pressing down again on the Start/Stop
Switch again will stop the blending process.
Variable Speed Dial: The Variable Speed Dial selects blade rotation speeds from
1 to 10 (low to high). Always begin the blending process with the Variable
Speed Dial pointed at Variable Speed 1.
Pulse Switch ( ): Pressing down on the Pulse Switch will cause the machine
to blend at the speed setting shown on Variable Speed Dial for as long as the
Pulse Switch is held down.
2
1
2
3
4