How to fix a leaking vitapur VWD520WLP?
If your Vitapur Water Dispenser is leaking, it might be because the drain cap and silicone seal are not secure. Ensure the seal is properly placed in the drain plug and tighten the drain cap.
What to do if my Vitapur Water Dispenser is not dispensing water?
If your Vitapur Water Dispenser isn't dispensing water, consider the following: * The water bottle might be empty. Replace it with a full one. * Mineral deposits might be clogging the tanks. Refer to the Cleaning of Reservoirs. * There could be an air pocket. Try pushing down the dispenser buttons to prime the unit. * The child safety lock (for hot water) might be activated. Deactivate it by pressing the lock button while simultaneously pressing the hot water lever.
Why is my vitapur VWD520WLP Water Dispenser so noisy?
If your Vitapur Water Dispenser is making noise, check if: * The dispenser is on an even surface that can support its full weight. Ensure it's properly leveled. * The water pump makes noise as it fills the tank. This is normal.
Why is my vitapur VWD520WLP not hot or cold enough?
There are several reasons why the Vitapur Water Dispenser might not be dispensing water that is hot or cold enough: * The water in the tank may have been used up. If this is the case, replace it with a full bottle and allow time for the water to heat or cool. * The unit might be unplugged, so ensure it is plugged into the outlet. * The hot and cold power switches at the back of the unit may be off. Turn both switches to the ON position. * The indicator lights may not be lit because the cooling or heating cycle will activate automatically when the water temperature is outside the optimum range. Allow the cycle to complete. * A tripped circuit breaker or blown fuse in your home can cause this issue. Reset the breaker or replace the fuse. * The hot water thermostat may have tripp...
Important warnings for safe operation, handling, and environment.
Covers initial handling, placement, and bottle installation steps.
Critical information on electrical safety and proper grounding.
Details of included items and technical product specifications.
Step-by-step guide for cleaning the reservoirs before first use.
Instructions on how to properly install a water bottle onto the dispenser.
How to dispense cold and hot water, including safety warnings for hot water.
Instructions for conserving energy when the dispenser is not in use for extended periods.
How to clean the outside surfaces of the water dispenser.
Instructions for removing and cleaning the drip tray.
Procedure for draining water from the dispenser's reservoirs.
Guide to diagnose and resolve common problems like leaks, temperature, and dispensing issues.
Details on the one-year limited warranty, what is covered, and common exclusions.
Information on obtaining service, customer support contact, and product registration.
General| Color | White |
|---|---|
| Material | Plastic |
| Child Safety Lock | Yes |
| Leak Proof | Yes |
| Water Temperature | Hot, Cold & Room Temperature |
| Capacity | 5 Gallon |
| Cold Water Temperature | 50°F |
| Power Consumption | 500W |
To Next Page