vitapur VWD602BLS - User Manual

Questions and Answers

J
Jeremy JimenezAug 7, 2025
Why is my vitapur Water Dispenser not hot or cold enough?
- M
  michellerobertsAug 8, 2025
  Several factors could affect the water temperature. The water in the tank may have been used up, so replace it with a full bottle and allow time for heating or cooling. Ensure the unit is plugged in and that the hot and cold power switches at the back are in the ON position. The indicator lights may not be lit because the cooling or heating cycle activates automatically when the water temperature is outside the optimal range, so allow the cycle to complete. The circuit breaker in your home may be tripped, or the fuse may have blown, so reset the breaker or replace the fuse. The hot water thermostat may have tripped, so turn off the hot water switch for 15-30 minutes to allow the tank to cool, then turn it back on. Finally, ensure the lower door is properly closed.
C
Carl WagnerAug 15, 2025
How to fix a leaking vitapur VWD602BLS Water Dispenser?
- J
  Jennifer ShepardAug 15, 2025
  If your vitapur Water Dispenser is leaking, the drain cap and silicone seal may not be secure. Make sure the seal is properly seated in the drain plug and tighten the drain cap.
S
Sean WhiteAug 23, 2025
What to do if my vitapur VWD602BLS is not dispensing water?
- C
  Christina FischerAug 23, 2025
  If your vitapur Water Dispenser isn't dispensing water, it could be due to several reasons. First, check if the water bottle is empty and replace it with a full one. It's also possible that mineral deposits are clogging the tanks, in this case you should refer to Cleaning of Reservoirs. Another possibility is an air pocket; try pushing down the dispenser buttons to prime the unit. Lastly, if it's the hot water that's not dispensing, ensure the child safety lock is deactivated by sliding the red lock button to the side while pressing the hot water button.
A
Austin StarkAug 29, 2025
Why is my vitapur VWD602BLS so noisy?
- R
  Renee JonesAug 29, 2025
  A noisy vitapur Water Dispenser can be attributed to a couple of reasons: First, make sure the dispenser is placed on an even surface that can adequately support its weight. Second, the noise might simply be the water pump filling the tank, which is normal.

Summary

Safety Information

General Safety Precautions

Important warnings and precautions for safe operation, maintenance, and environmental disposal.

Safety Information (continued)

Handling and Placement Guidelines

Instructions on proper handling, placement, ventilation, and maintenance schedule for safe operation.

Pre-Operation

Grounding Precautions

Essential safety guidelines for proper grounding to prevent electrical shock, fire, or damage.

Electrical Requirements

Specifications for power supply, circuit protection, and outlet types for safe operation.

Package Contents

Lists all components included in the product package for initial setup and verification.

Initial Product Cleaning

Step-by-step guide for cleaning reservoirs before first use to ensure water purity and hygiene.

Installing the Water Bottle

Instructions on how to properly install a water bottle, including adjusting the straw, for dispensing.

Control Panel LED Light Functions

LED Indicator Guide

Explanation of the meaning of different LED indicator lights for water status and bottle levels.

Operation

Dispensing Cold Water

Instructions on how to dispense cold water, including notes on temperature settings.

Dispensing Hot Water

Instructions on dispensing hot water, with critical safety warnings about high temperatures.

Going Away On Vacation

Guidance on how to prepare the dispenser for extended periods of non-use, including energy conservation.

Care and Cleaning

Cleaning the Outside

Steps for cleaning the external surfaces of the water dispenser safely and effectively.

Cleaning the Drip Tray

Instructions for removing and cleaning the drip tray to maintain hygiene and prevent overflow.

Draining the Reservoirs

Procedure for safely draining water from the reservoirs, with a caution about hot water.

Troubleshooting

Warranty

vitapur VWD602BLS Specifications

General

Color	Black
Water Temperatures	Hot, Cold, Room
Heating Capacity	5 L/h
Capacity	3 or 5-gallon bottles
Hot Water Temperature	≥85°C
Cold Water Temperature	≤10°C
Voltage	110 V
Type	Bottom Loading
Cooling Capacity	2.5 liters/hour
Material	Plastic