EasyManua.ls Logo

Vitek VT-2130 - Product Overview and Safety; Component Identification; Control Interface Overview; General Safety Precautions

Vitek VT-2130
46 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
4
FAN HEATER WITH AIR HUMIDIFYING
FUNCTION
Description
Support1.
Front grid2.
Steam outlet3.
Steam intensity control4.
Display5.
Control panel6.
On/Off button (0/I)7.
Carrying handle8.
Water tank9.
Water tank removing handle10.
Water tank tray11.
Power cord12.
Control panel
Temperature “+” “-“ buttons13.
Steam intensity control14.
Low heating power button15.
Maximal heating power button16.
Timer setting button17.
Rotation on/off button18.
ON/OFF button19.
Humidifying function button20.
Display
Temperature indicator (21. °C,
°F)
Automatic temperature maintenance indi-22.
cator
Low power indicator23.
Maximal power indicator24.
Humidifying function indicator25.
Time before end of the operation indicator 26.
Empty water tank indicator 27.
Power indicator28.
Fan mode indicator29.
Heating mode indicator30.
Remote control
Temperature increase/decrease button31.
Humidifying function on button32.
Rotation on/off button33.
Timer setting button34.
Heating power35. selection button
On/Off button36.
SAFETY MEASURES
Before using the unit, read the present instruc-
tions carefully and keep them for future refer-
ence.
Before switching the unit on read this in-
struction carefully
.
Before using the appliance for the first time
make sure that operating voltage of the unit
corresponds to the voltage in your mains.
In order to avoid risk of fire, do not use
adapters while connecting the appliance to
the outlet. Never insert the plug into defec-
tive or worn-out outlets.
In order to avoid network overloading, pro-
vide that no other electrical appliances with
higher power consumption are connected
to the same outlet the unit is connected to.
During operation the grid heats up heavily.
Be careful. Avoid contact of the unit with
your skin to prevent getting burns.
The distance between the unit and furniture,
pillows, furnishing, papers, clothes, and
curtains should be at least 0.9m far from the
front of the fan heater and keep them away
from the sides and rear.
Never cover the fan heater with clothes or
fabric materials during operation.
Close supervision is necessary when chil-
dren or disabled persons are near the unit.
This unit is not intended to be used by chil-
dren or disabled persons unless they are
given all necessary instructions on safety
measures and information about danger,
which can be caused by improper use of
the unit.
Do not move, hang up or carry the cord
of
the appliance
Do not operate the fan in a restricted space
(for instance, in built-in closets or wall al-
coves - for tubes defrosting or to prevent
their freezing).
Never wind the cord over the case of the
unit.
Do not switch on and do not use the fan
heater if the cord or the plug is damaged or
if the fan heater works irregularly, fell or is
damaged. In this case contact an authorized
service center for testing and repair.
ENGLISH
2130 Instr.indd 42130 Instr.indd 4 18.07.2011 10:21:1018.07.2011 10:21:10

Related product manuals