5
(3) PC CAM ：Long Press to switch and enter USB DISK or PC
CAM mode. See below (16-4) for details.
(4) Snapshot ：Press to snapshot or stop video recording;
Long press to start video recording.
(5) LED Adjustment: 12 levels of brightness.
(5-1) Increase ：Increase LED brightness.
(5-2) Decrease ：Decrease LED brightness.
(5-3) On/Off ：Turn the LED on/off. When turn on the LED, the
brightness will return to the situation before turn off.
(6) Motor Reset (Recalibrates entire operation)：Returns to the
lens position. If a loss of electricity occurred during operation,
please reset the operation.
(7) Manual focus
(7-1) Zoom in ：Zooms in; speed increases when held.
(7-2) Zoom out ：Zooms out; speed increases when held.
(7-3) Step zoom in ：zoom in by steps.
(7-4) Step zoom out ：zoom out by steps.
(8) Autofocus: Press one time to search focus in current area, long
press for 2 seconds to search focus in whole area.
(8-1) Single Autofocus : Focuses one time.
(8-2) Continuous Autofocus :Re-focuses when image blurred.
To Next Page
Loading...
