Need help?Do you have a question about the Vitrek 955i and is the answer not in the manual?
General| Brand | Vitrek |
|---|---|
| Model | 955i |
| Category | Measuring Instruments |
| Language | English |
Crucial safety guidelines regarding power connection and protective grounding of the 95x.
Safety instructions for connecting and wiring the 95x terminals, emphasizing high voltage precautions.
Describes methods for the user to manually abort a test sequence for safety.
Details automatic safety abort features that protect against hazardous conditions.
An overview of the 95x's front panel controls, display, and indicators.
General principles for navigating menus and entering data on the 95x front panel.
Step-by-step guide for managing the menu lock password.
Describes how to view and set system-wide configuration parameters.
Instructions for resetting all 95x settings to their factory default values.
Settings that apply to all test steps within test sequences, like beep volumes and safety settings.
Step-by-step guide for defining and programming a new test sequence.
Instructions on how to modify previously created test sequences.
How to choose a test sequence and initiate its execution.
Detailed explanation of how to review and interpret test results, including failure codes.
Explanation of how to set breakdown, leakage, and arc current limits for tests.
Details on configuring ACEZ, ACW, and ACCAP test types for AC voltage testing.
Details on configuring DCEZ, DCW, and DCIR test types for DC voltage testing.
Details the PULSE test type for devices that cannot withstand static voltages.
Details the BRKDN test type for breakdown voltage testing.
Details the LOWΩ test type for low resistance measurements.
Details the GBEZ and GB test types for AC ground bond testing.
Details the DCI and ACI test types for ground leakage current testing.
Wiring instructions for connecting the DUT for ground leakage testing.
Details the SWITCH test type for controlling external switch matrix units.
Provides examples and explanations for configuring SWITCH test steps.
Details the PAUSE and HOLD test types for controlling test sequence timing.
Specific configuration settings for controlling the 95x via RS232.
Specific configuration settings for controlling the 95x via GPIB.
Configuration steps for connecting the 95x to a network via Ethernet.
How to configure the DIO interface settings via the front panel menu.
Procedure for running the 95x's internal diagnostic self-test.
Explains the internal software calibration process for maintaining accuracy.
Step-by-step instructions for performing the adjustment calibration procedure.
Procedure for verifying the 95x's calibration using built-in or custom sequences.
Lists the equipment needed for calibration verification procedures.
Instructions on how to initiate the internal verification procedure.
Procedure for verifying the accuracy of DC voltage measurements.
Procedure for verifying the accuracy of DC current scaling.
Procedure for verifying the accuracy of AC voltage measurements.
Procedure for verifying the AC current zero offset.
Procedure for verifying low resistance measurements.
Procedure for verifying ground bond resistance.
Verification procedure for current measurements with Option HSS fitted.
Verification procedure for current measurements with Option HSS-2 fitted.
Explains the overall structure and rules for sending commands to the 95x.
A comprehensive list of commands for controlling the 95x via interface.
Commands for managing test sequences: ADD, CLRLEADS, NAME, NOSEQ, RCL, SAVE, SET.
Commands to prepare and execute test sequences: READY, RUN, RUN,LEADS.
Commands to control a test sequence while it is running: ABORT.
Commands for configuring various settings like beeps, date, DHCP, DIO, and fail settings.
Defines the parameters for configuring an ACEZ test step via commands.
Defines the parameters for configuring an ACW test step via commands.
Defines the parameters for configuring a DCEZ test step via commands.
Defines the parameters for configuring a DCW test step via commands.
Defines the parameters for configuring a DCIR test step via commands.
Defines the parameters for configuring a GBEZ test step via commands.
Defines the parameters for configuring a GB test step via commands.
Defines the parameters for configuring a LOWΩ test step via commands.
Defines the parameters for configuring an ACCAP test step via commands.
Defines the parameters for configuring an ACI test step via commands.
Defines the parameters for configuring a DCI test step via commands.
Defines the parameters for configuring a PULSE test step via commands.
Defines the parameters for configuring a BRKDN test step via commands.
Defines the parameters for configuring a PAUSE test step via commands.
Defines the parameters for configuring a HOLD test step via commands.
Defines parameters for SWITCH test steps with 948i units.
Defines parameters for SWITCH test steps with 964i units.
Table listing status flags indicating test step results and conditions.
Details the fields returned by the STEPRSLT? query for specific test step results.
Recommendation to run tests as sequences for efficiency and proper operation.
To Next Page
