Once you are happy there is no
leaks seal the rear edge of the
toiilet with silicone sealant.
33
Place the pan onto the bolts.
Ensuring someone is holding it into
position check tha pan is level.
28
At this point lubricate the cut ends
and insert the connectors fully into
the corresponding wall outlets.
26
Locate the wall protector
membrane and hang against the
wall.
27
Tighten on both sides with a socket
wrench. Do not over-tighten.
30
Cut the wall membrane around the
outer edge of the toilet and discard
the excess membrane.
32
31
Place the blanking caps onto the
ends of the bolts.
Secure on both sides with plastic
washer, metal washer and nut.
Please note depending on the
brand of pan fixing method may
dier.
29
To Next Page
Loading...