Vivanco 8 IN 1 UNIVERSAL LCD REMOTE CONTROL QUOTSOFT TOUCHQUOT User Manual

UR 820 LCD UNIVERSAL CONTROLLER
Vivanco GmbH, D-22926 Ahrensburg, E-Mail: hotline@vivanco.de, Helpline: +49 (0) 4102 231135
(GB) Instructions ¾ 5
(D) Bedienungsanleitung ¾ 9
(F) Notice d’emploi ¾ 13
(E) Instrucciones para el uso ¾ 17
(I) Istruzioni per l’uso ¾ 21
(NL) Gebruiksaanwijzing ¾ 25
(PL) Instrukcja obsługi ¾ 29
(CZ) Návod k obsluze ¾ 34
(P) Manual de instruções ¾ 38
(DK) Betjeningsvejledning ¾ 42
(S) Bruksanvisning ¾ 46
(RUS) Руководство по
эксплуатации ¾ 50
(GR) Οδηγίες χρήσης ¾ 54
Programming Guide
Fig. 1: Direct Code Entry

Vivanco 8 IN 1 UNIVERSAL LCD REMOTE CONTROL QUOTSOFT TOUCHQUOT Specifications

General

Compatibility	Universal
Number of Devices Supported	8
Display Type	LCD
Brand	Vivanco
Model	QUOTSOFT TOUCHQUOT

Summary

Programming Guide

Direct Code Entry

Set remote control to operate a specific device using direct code entry.

Code Search

Automatic Code Search

Remote control automatically finds correct control settings by searching through codes.

Learning/Program Keys

Programming Keys

Capture and program up to 100 key functions, max 40 per device.

Delete Programmed Keys

Delete Single Learnt Key

Procedure to delete a specific learnt key from the remote control.

Delete Learnt Key Sets

Delete all learnt/programmed key sets for a single device.

Delete All Learnt Keys

Procedure to delete all programmed keys from the remote control.

Clock Setting

Setting the Time

Procedure to set the current time on the remote control's display.

Set Volume Control Priority

Volume Control Priority Setup

Assign exclusive volume control to a specific device like an audio amplifier.

Lock Or Unlock Device Codes

Device Code Locking

Prevent accidental changes to device settings by locking or unlocking codes.

Macros

Program Macros

Program a sequence of up to 10 control commands to be output on pressing one macro key.

Delete Macros

Procedure to delete programmed macros from the remote.

Control Any Device

Control Via AUX

Use the AUX device key to control any device, e.g. a second VCR.

Other Settings

Backlight Adjustment

Switch the LCD illumination ON or OFF to save battery capacity.

Contrast Adjustment

Adjust the contrast to improve readability of the remote control's display.

Default Settings

Reset the remote control to factory default settings to correct malfunctions.

Operation and Scanning

Basic Operation

Operate appliances similar to original remotes, pressing device button first.

Scanning Programs

Scan TV or DVB programs by pressing the TV/DVB key and SCAN key.