Why is mist emitted from my Vivax ACP-07CIFM21GEEI during cooling operation?
The emission of mist during cooling operation of your Vivax Air Conditioner occurs because the air in the room is rapidly cooled down by the cold wind, creating a fog-like appearance.
Why can I hear the sound of water flow during Vivax ACP-07CIFM21GEEI Air Conditioner operation?
The sound of water flow you hear during the operation of your Vivax Air Conditioner is caused by the refrigerant flowing inside the unit.
Why is there a creaking noise when I start or stop my Vivax Air Conditioner?
The creaking noise heard when starting or stopping your Vivax Air Conditioner is caused by the deformation of plastic due to temperature changes.
General| Type | Split System |
|---|---|
| Energy Efficiency Class | A++ |
| Refrigerant | R32 |
| Power Supply | 220-240V, 50Hz |
| Cooling Capacity | 7000 BTU |
| Cooling power | 2.05 kW |
| Noise level (indoor unit) | 26 dB |
| Power Consumption (Cooling) | 707 W |
| Noise Level (Indoor) | 26 dB |
| Dimensions (Indoor Unit) | 290 x 800 x 195 mm |
Warnings about voltage stability, power cord integrity, and using correct cords.
Ensuring proper airflow, avoiding obstructions, and keeping doors/windows closed for efficiency.
Using dedicated circuits, avoiding frequent on/off, handling smoke/smells, and keeping flammables away.
Avoiding self-repair, water splashing, heater proximity, and targeting living beings.
Explains cooling, heating mechanisms, and the automatic defrost cycle.
Details on Anti-Cold Air and Residual Heat Blow functions for comfort.
Specifies the operational temperature limits for cooling and heating modes.
Identifies and describes the parts of the indoor unit.
Introduces the remote, its handling, and basic button functions.
Explains functions like timers, swing, X-FAN, TURBO, and display icons.
Instructions for replacing remote control batteries and related notes.
Guide for operating the unit via the manual switch in emergencies.
Steps for cleaning the front panel and air filters.
Addresses common problems like smells, noises, and unit failures.
Identifies critical issues requiring immediate shutdown and dealer contact.
Essential safety measures, site selection, and dimension guidelines for installation.
Steps for installing the indoor unit, piping, and drainage.
Connecting wires, post-installation checks, and performing test operation.
How to install, clean, and maintain the healthy filter.
Specifications for pipe lengths and calculating additional refrigerant.
Guidelines for proper disposal of the air conditioner and its batteries.
To Next Page