42
7. Cleaning and care
Warning - Risk of electric shock!
Unplug the product and let it cool down completely before cleaning. Never immerse
electrical parts of the product in water during cleaning or operation. Never hold the product
under running water.
Warning - Property damage!
When cleaning, never use solvents or abrasive materials, hard brushes, metallic or sharp
objects. Solvents are harmful to human health and can attack plastic parts, while abrasive
cleaning mechanisms and tools may scratch the surface(s).
1. Clean the product’s exterior surfaces with a slightly damp cloth and then dry them thoroughly.
2. Make sure that no water enters the product interior (for example, through the switch).
3. Clean the metal rack in warm, soapy water.
4. Clean the cavity, the door seals and adjacent parts regularly with a damp cloth. When food splatters
or spilled liquids adhere to oven walls, wipe with a damp cloth.
5. Wipe the cavity dry afterwards using a soft cloth.
6. The glass tray can be removed for cleaning. Clean the tray in warm, soapy water.
7. The turntable roller and the cavity bottom should be cleaned regularly to prevent excessive noise.
Simply use a mild detergent to wipe the surface and allow it to dry. If the turntable roller is removed
for cleaning, make sure to re-insert it properly before next use.
8. In the event that the light bulb inside the cavity must be replaced, please contact authorised service
agent.
9. Odours in the cavity can be neutralized by filling a microwave-suitable cup with water and lemon
juice and boiling it in the microwave oven for 5 minutes.
8. Disposal
Do not dispose of this product as unsorted municipal waste. Return it to a designated
collection point for the recycling of WEEE. By doing so, you will help to conserve
resources and protect the environment. Contact your retailer or local authorities for more
information.
MWG9001SW_A5_130911.indb 42 11/9/13 2:03 PM
To Next Page
Loading...
