VIVI MT20 - Adjustment of Angle of Handlebar

10
Note: When adjusting the height of stem, please do not exceed the limit line!
Adjust the four screws used for connecting the handlebars to the stem and
adjust the angle of handlebar.
Make sure the handlebars are perpendicular to the front wheels.
5.2 Adjustment of angle of handlebar
Applicable to models C26 / MT26G
Applicable to models MT20 / MT20-P / FM201 / FM201-P / C26 / MT26G
5.1.2
5.2.1
Remove the guard plug, install the handle into the stem, align it to the front fork, and
then tighten the screw.