Applicable to models MT20 / MT20-P / FM201 / FM201-P / C26 / MT26G
5.3.1
5.3.2
Release the fixing rod of front fork with the tool No. 8 (M17 wrench) and remove
it (this part is to prevent deformation of front fork during delivery)
Put the front wheel into front fork. Fix the front fork hanger on the axle and put
the brake disc in the middle of brake. Tigthen the screws on both sides with the
tool No.7 (M15 wrench).
5.3 Installation of front wheel
Applicable to C26 model5.2.2
Adjust angle of handle and then tighten the screws.
To Next Page
Loading...
