VIVI MT20 - Installation of Lights and Fender

12
Applicable to models MT20 / MT20-P / FM201 / FM201-P / C26 / MT26G
5.4.1
5.4.2
5.4.3
Loosen the screws at the corresponding position of the front wheel, as shown in
the figure below. Put the fender in this position.
Connect the headlights and fasten loose screws again. Adjust the position of
lights and tighten the screws.
Loosen the screws used for fixing the fender, fix the fender, and then tighten it
again.
5.4 Installation of lights and fender