EasyManua.ls Logo

Vivid EASYMOUNT User Manual

Default Icon
7 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Product instruction manual
Easymount Wide Format Laminators
The Easymount has been designed to be user friendly,
however we strongly recommend you take a few minutes
to read through this manual to ensure correct operation.
Keep this manual safe for future reference.
Question and Answer IconNeed help?

Do you have a question about the Vivid EASYMOUNT and is the answer not in the manual?

Vivid EASYMOUNT Specifications

General IconGeneral
Max. Laminating Width1600mm
Speed5m/min
Power Supply220V, 50Hz
Laminating Width1600 mm
Laminating Speed0-5m/min (0-16.4 ft/min)

Summary

Introduction

Safety Instructions

Environmental Requirements

Control Panel Overview

Product Specifications

Laminating Film Installation

Pressure Sensitive Film Loading (Top Mandrel)

Steps for loading pressure-sensitive film onto the top mandrel.

Vinyl/Liner Paper/Mount Film Loading (Bottom Mandrel)

Instructions for loading vinyl, liner paper, or mount film onto the bottom mandrel.

Take Up Mandrel and Release Liner

Procedures for handling the take-up mandrel and release liner.

Film Loading Procedures

Pressure Sensitive Film Loading (Top Mandrel)

Detailed steps for loading pressure-sensitive film onto the top mandrel.

Liner Paper Loading (Bottom Mandrel)

How to load liner paper onto the bottom mandrel.

Feeding the Film

Alternative Feeding Method

An alternative procedure for feeding the film through the laminator.

Laminating Modes

Cold Laminating

Instructions for performing cold lamination using the Easymount machine.

Single Hot Laminating

Steps for performing single hot lamination with the Easymount.

Mounting Film

Alternative Mounting Method

An alternative method for mounting film onto the laminator.

Media Rewind Take Up System

Optional Extras

Media Brackets

Details on installing and using optional media brackets.

Laminating Adjustments

Temperature Adjustment

Guidance on adjusting the laminating temperature for optimal results.

Speed Adjustment

How to adjust the machine's speed for different laminating tasks.

Roller Pressure Adjustment

Instructions for setting and adjusting the roller pressure.

Warranty and Incorrect Use