Connect the battery plug on the underside of your aircraft
to power it on. The light on the motherboard will illuminate.
Place the aircraft so that it lies flat on a stable surface such
as a table. Make sure that the aircraft lies still so that the
remote control can calibrate its frquency and determine its
neutral point.
9. SYNCHRONIZING THE AIRCRAFT WITH THE REMOTE
Step 1
Step 2
Step 3
Step 4
Pull the throttle stick straight down, and turn the remote
control’s power on.
ON/OFF
ON/OFF
When you are finished flying your aircraft,
unplug power cord.
Warning: If the power cord is not pulled out,
there may be excessive discharge, increasing the
risk of fire.
WARNING
Power down the remote control. If the transmitter will
not be used for an extended period of time, please
remove the batteries.
CAUTION
Pull the throttle
stick straight down.
6
Unplug
To Next Page
Loading...
